How to install white walls for your VW Beetle?

November 20, 2016

If you want your car to look at its best and you also want to boost its visual appeal, you should consider the idea to install white walls for VW Beetle. It can be a great investment, however it might be a little hard to do that on your own. If you have a little trouble with the process, we are here to help!
 
In order to start the process you will need to have a tire machine. You need to break the bead off of the rim and then you have to make sure it’s broken all around. Set the tire on the tire machine, tighten it up and then you get a bead sealer. Put the sealer between the tire and rim. You do need to have a clean rim if you want the best results, so keep that in mind. Get the portal wall, insert it in between the rim and the tire.
 
It has to go in dry, if not it will fly down the road. Add air into the tire and wait until the bead pops. That’s when you know the tire is seeded into the rim. Get a rubber mallet and start pressing the white wall. Remember that the you need to add the valve into the valve stem, tighten it up, add more air.
 
Add as much air as you can because this will help sit in nicely, not to mention that it will provide a much better result. Hammering down might be hard at first especially but remember that there you need to avoid any air patches. Make sure that it’s nice and flat to get the best outcome. Don’t rush, just take your time. Inflate air once again.
 

how-to-install-vw-beetle-white-walls vw beetle white walls

 
Add some soapy water then spray the outside. If there is any air coming out, you will have to try and continue the process in order to eliminate any problematic issues that might appear here. You will have to try and repeat the process until you see no bubbles. It might seem problematic at first, but this will actually provide you with the guidelines that you need in order to deliver faster and better results. While it might take a little bit of time at first, it’s exactly what you need to do if you want to ensure proper results when you install white walls.
 
And that’s how you install white walls for VW Beetle. It’s a very good process that will help protect your car and it will also offer that good set of visuals that you want to see from a Beetle model. It might not be easy to find a good model to suit your needs, but most of the time this will do just fine. Keep that in mind and results will pay off! As we mentioned earlier, you need to avoid installing any VW Beetle White Walls if you don’t have patience, as this is a process that does eat up quite a bit of time so you want to make sure that you are ready for this type of task!